PLT Red Seal Exam Prep
Delivery/duration: 10 HOURS
Online Curriculum — 9 Study Modules
These module titles and scheduled durations come from the Lineman Canada training catalogue. Descriptions are study overviews, not complete lessons or a substitute for official examination requirements.
- Module 01 — Safety, PPE, Grounding, Permits (approximately 1 hour)
Review hazard-control principles, protective equipment selection and limitations, grounding concepts and permit systems. Follow applicable employer and jurisdictional procedures.
- Module 02 — Live Line Methods, FRP Tools, Rubber Glove (approximately 1 hour)
Review live-line method categories, equipment awareness, minimum approach concepts and limitations. Only properly qualified, authorized workers perform energized work.
- Module 03 — Protection and Switching (approximately 1 hour)
Study protection fundamentals, equipment identification, switching documentation and communication requirements. Switching is performed only under applicable authorization.
- Module 04 — Transformers, Banks, CTs, PTs, Metering (approximately 1 hour)
Review transformer principles, common configurations, instrument transformers and metering concepts used in powerline systems.
- Module 05 — Underground Systems (approximately 1 hour)
Review underground distribution components, cable systems, identification practices and coordination requirements for safe work.
- Module 06 — Streetlights and Controls (approximately 1 hour)
Review streetlighting circuits, photocontrols, contactors and common control-system components, including basic fault-identification concepts.
- Module 07 — Rigging, Sag, Guys, Anchors (approximately 1 hour)
Review rigging principles, load considerations, conductor sag, guying systems and anchor applications with reference to approved procedures.
- Module 08 — Structures, Poles, Overhead Conductors (approximately 1 hour)
Review pole and structure components, overhead conductor types and common installation and maintenance considerations.
- Module 09 — Troubleshooting and Repair Logic (approximately 1 hour)
Practice structured diagnosis from symptoms and system information, including isolation, documentation and escalation to authorized personnel.
Scheduled module study: 9 hours. The public program lists 10 hours total; the remaining hour is reserved here as a general review/practice allowance, pending confirmation of the live course schedule. This does not add a tenth module or change examinations.
Training and assessment
See the official program page for pricing, assessment requirements, certificates, eligibility and access details. Learning modules and progress are delivered within your authenticated Lineman ID.
Module descriptions are based on the supplied public page. Full lesson content is delivered through the protected Lineman Canada training system. This outline is informational and does not replace employer competency authorization.